News

Many customers who manufacture tower saw segments choose to add ultrafine iron powder. But do you know the advantages of adding ultrafine iron powder?

What is the biggest problem with cutting blades when cutting rock slabs? Eight out of ten customers will say that the cutting blade "chips". The root cause of chipping lies in the following characteristics of the rock slab.

We keep asking customers who make 105 ceramic cutting saw blade: what do you value most about them? In the end, most customers tell us that a lightweight feel is the most important.

Pre-alloyed powders act as binders in the matrix of diamond saw blades. When designing their compositions, the following requirements should be considered:

The common manufacturing methods of diamond tools are divided into three mainstream processes: sintering, electroplating, and brazing, all of which use metal powder as one of the raw materials. This article mainly introduces sintered diamond tools.

In the previous issue, we talked about the performance requirements for the matrix of tower saw segments used for cutting "Huangjinma" granite. In this issue, Sagwell will continue to discuss what micron iron powder should be used in the segments for cutting high-silica sandstone from Macheng.

In the previous article, Sagwell talked about what kind of high-activity micron iron powder is generally used for tower saw segments to cut white hemp stone. In this article, we will continue to discuss what type of metal powder should be chosen for the matrix of the segment used to cut golden hemp.

The application of FeZn alloy powder in diamond tools is primarily reflected in its use as a matrix or coating material to enhance the tool's physical-mechanical properties and operational efficiency.

At the end of last year, a wire saw customer mentioned to Sagwell's technicians that his product—wire saw beads—always had insufficient hardness and uneven sizes during cutting. When cutting mine rough stones or granite, the  wire would break, and the beads would swing off-center.

Through the unremitting efforts of Sagwell's R&D department, a wire saw alloy powder was born. As a formula powder, what properties make it worth having?